Modix Everest
Print Tall
Introducing Modix Everest – our tallest, fastest 3D printer. With a build volume of 970 X 1,030 X 2,000 mm (XYZ) , Everest produces full-height parts in a single, seamless print.
High Speed
Equipped with the Griffin Ultra print head, Everest delivers over 500g/hour with a 1.6 mm nozzle and 1.2 mm layer height. This dramatically reduces total layer count, slashing print time.
Stronger Parts & Minimal Post Processing
No more patching smaller prints. Everest outputs production-ready parts that are stronger, cleaner, and faster to finish.
Print life size models in hours not days!
Get Your Free Downloads!
Fill out the form, and we’ll send you download links to our comprehensive technical guide and Modix’s Innovator Magazine.
Get Download Links By Email:
Included add-ons
Everest is based on our poplar Modix BIG-Meter 3D printer and is delivered with he following add-ons by default: Enclosure, Modix Griffin standard and the new Griffin Ultra print-heads, large spool mounting, Casters, Tilt screen , Z HiWin rails, Clog & Crush detectors.
Optional add-ons
- Magnetic bed
- IDEX dual print head
- Air filter
- Various print head add-ons and replacement parts.
Safety
We’ve updated the BIG-Meter lid to store filament spools inside the printer for safety. Maintenance and spool changes now require working at height—check your local safety policies. A platform ladder is safer and more convenient than a standard one, especially when carrying spools. Modix does not supply ladders or safety gear; please source them locally as needed.
Specifications
- Print volume: A staggering 970 X 1,030 X 2,000 mm (XYZ)
When equipped with the Griffin Ultra print head. - Overall Size: 1356x1445x3068 mm (XYZ)
Make sure your installation site has a tall ceiling. - Weight: ~236 KG
- Assembly- Served as a self assembly kit and therefore it can enter via narrow and short doorways. Please ask us about assembly services.
- Controller: Duet3D Wi-Fi 32 bit. controller & Duex5 Expansion board providing automatic bed tilt calibration & 100 probing point for bed leveling.
- Electricity requirements – single phase, 208-240V:
- North America customers: NEMA L6-30P 30A outlet
- EU/AU/UK customers: IEC 309 32A Blue (2P+E) outlet
- Warranty: Price includes 12 months of warranty and lifetime support. Warranty does not include degradable (PEI sheet and nozzles) and consumables. Warranty can be extended up to two additional years.
- Shipping cost: is a flat fee for continental USA and West Europe no matter how many add-ons you add. For any other country, please ask for a custom shipping quote by email: sales@modix3d.com.
Please select the correct regional shipping rate at the bottom.
Ordering add-ons later on, will require additional shipping fee.
Customize your printer
You can place your customized order and choose between wire transfer—we’ll provide the details—or credit card for online payment.
Alternatively, use the form below to request a tailored quote and proforma invoice.
Modix Everest
Base Everest 3D printer. Including enclosure, Griffin Ultra print head, PDU and an internal spool shelf.
IDEX Dual Print-head
Print with a dedicated support material to easily print intricate models and reduce post processing time. It can also be used as automatic filament changer. Learn more
IDEX Calibration Tool
Pre-order now: Achieve precision like never before with our hands-free calibration tool ensures optimal nozzle alignment.
Magnetic Bed
Enjoy easy part removal and easier bed maintenance. This add-on is highly recommended as it saves a lot of time. The supplied PEI sheet works but it is degradable and may require replacement after some time of use.
Active Air Filter
Three phase filter device: Pre-filter (dust), HEPA (sub-micron particles) and active carbon filter (fumes).
Griffin High-Flow
Including: Griffin HF Heat-block, 80W heater, PT-1000 Thermistor & 1mm nozzle.
Spare Griffin Hotend
Spare Griffin Hotend set.
Including: Slice eng. bi-metal Heatbreak, Modix Griffin Heat Block, 0.4 mm Nozzle, 50W Heater and PT-1000 thermistor and a silicon sock.
Volcano Brass Nozzles
Volcano brass nozzles pack with 5 nozzles (0.4/0.6/0.8/1.0/1.2 mm).
A range of nozzle sizes for high-flow, fast printing.
* 0.4/0.6/0.8 already comes as default with the printer
Nozzle-X Pack
Volcano Nozzle-X pack with 3 nozzles (0.4/0.6/0.8mm).
The hardened steel, nickel-plated with a non-stick coating nozzle allows printing abrasive materials (carbon fiber-filled, glass fiber-filled, wood, glitter…) without degrading, and is rated to a maximum temperature of 500°C.
Basic Maintenance Kit
Essential components for the print head and motion system. Keep your printers running smoothly.
*Contact us for ETA
Advanced Maintenance Kit
Inside the kit, you’ll find a range of spare parts including belts, pulleys, screws, bearings, motors, printhead parts, and fasteners These components are specifically designed to fit Modix printers V4.
*Contact us for ETA
Soluble solution – 1000g
Specifically formulated to dissolve prints created with our Soluble Filament.
Submerge your 3D prints in water combined with this solution for a clean and efficient dissolution process.
Soluble filament – 500g
Print with this soluble filament to create intricate designs and supports for your 3D prints. After printing, use water + the soluble solution to dissolve it.
* Soluble Solution is not included and needs to be purchased separately.
Professional Services
Let us help you with optimizing design, slicing settings & material selection, and move swiftly from concept to successful completion.
Included: a bank of 3 hours for video calls
Extended Warranty
Extension of manufacturer’s warranty terms by a continuous period of 12 months starting from the expiry of standard warranty.
For two years, please add this item twice.
Shipping options:
- Our shipping is handled by couriers selected according to your location. Shipping terms: Incoterms 2020 DAP
- Modix operates three global warehouses. Self-pickup is available, depending on inventory status.
- US customers – import duties may apply, please contact sales@modix3d.com.
- EU customers – If you’re an EU customer, please provide us with a valid VAT number. Without it, we’ll need to add an extra 21% VAT to your order
