01
Adsorption
Internal valve doors open. Moisture is naturally absorbed by molecular sieves inside the chamber. This stage is passive and can continue even when power is interrupted.
Solid-state drying for
5 kg & 8 kg spools.
The only filament dryer designed for the spool sizes production jobs actually use. A solid-state system that actively removes moisture from the chamber with adsorption and exhaust. No chamber heating. No recirculation. Built for Nylon, PC, PETG, ASA, and support materials.
Moisture is removed
5 kg x2 / 8 kg x1
Universal printer fit
Watch · 60 sec
8 kg
single spool capacity
2 x 5 kg
dual spool capacity
2-stage
adsorption plus exhaust
$1,600
110V or 230V
Advanced solid-state drying
Two stages. One goal: low moisture.
02
Exhaust
Internal valves seal while external vents open. The captured moisture is pushed outside the chamber instead of recirculating through the workshop air.
Long prints. No spool swap.
Print engineering parts without pausing mid-job.
Every pause in a print is a risk. Layer interfaces become weak points. Engineering polymers cool unevenly across a stop. Color seams and dimensional drift show up in the finished part. The Modix dryer holds enough filament to run the whole job from a single load.
- One 8 kg spool covers prints that would otherwise need two or three spool swaps. Run the part in one continuous pass.
- Engineering polymers like Nylon, PC, and PETG keep their full mechanical strength when the print runs uninterrupted.
- Two 5 kg spools side by side for backup material, color changes, or the next job — without unloading the dryer.
- Feeds any Modix or non-Modix 3D printer through the external guide tube. Print farms can standardize material condition across every machine.
Specifications
Industrial drying in a compact footprint.
Capacity
Two 5 kg spools or one 8 kg spool
Internal chamber
350 mm dia × 320 mm length
Dimensions
400 × 430 × 835 mm
Weight
16.5 kg
Method
Molecular-sieve adsorption & chamber exhaust
Compatibility
All Modix and non-Modix 3D printers
Voltage
110V or 230V options
Price
$1,600 USD before shipping
Order your Modix Filament Dryer.
From $1,600 USD.
Shipping is quoted separately based on destination. Import duties, VAT, and customs fees are the buyer's responsibility and vary by country. The Modix sales team will confirm the full landed cost before invoicing.
Talk to Modix sales
Use this for bulk orders, print farms, distributor inquiries, or to confirm fit for a specific printer.